로그인 l 회원가입 l 마이페이지 l 장바구니
회사소개|상품리스트|고객지원|커뮤니티

Reference

Measuring the speed of sound - using 2 microphones a meter apart

0점 영일교육시스템 2015-12-10 추천: 추천 조회수: 405

Sound                                                                                                               

This experiment describes the use of a PC oscilloscope to measure the speed of

sound.  The ADC-212 used in this experiment has now been discontinued but the

experiment can be performed with any PicoScope oscilloscope that has at

least 2 channels.

                                   Experiment Set Up

Equipment required

  • Two Microphones — crystal microphones were used here since they are cheap and give a large output
  • 1 metre wooden rule
  • Digital storage oscilloscope — the ADC-212 was used
  • A balloon — to burst for a sudden loud sound source

Experiment set up

The experiment was set up as shown below with the two crystal microphones placed 1 metre apart.

The Oscilloscope timebase was set to 500 µs/div and the trigger position set to 10% pre-trigger. This allows us to collect 500 µs of data before the bang and 4.5 ms of data during the event.

Experiment Results

Results

The balloon was burst approximately 2 m away from the foremost Mic. The plot below shows the results clearly.

The lefthand “Blue” trace is from the foremost Mic (Mic1) and the righthand “Red” trace is from the furthest Mic (Mic2).

The waveform from Mic1 between -164 µs and 500 µs is clearly visible in the trace from Mic2 delayed by 2929 µs.
There is a second variation, in the waveform from Mic1, around 1.5 ms caused by an echo from one of the walls or ceiling.

From this plot we can measure the time between the two waveforms - 2929 µs.
This is over 1 metre which equates to 341.4 m/s.

When calculating the speed of sound through the air we need to take into account the factors which can affect the speed.

The main factors are:

Temperature.
Water Vapour content (Relative Humidity).

The Temperature and Relative Humidity during the test were approximately 20 DegC and 50% respectively.

We can use the table below to find the expected speed: 344 m/s or 2.907 ms/m.
The matches very well with the observed results shown above.

m/sRH %
Temp °C102030405060708090
0331.5331.5331.5331.6331.6331.6331.7331.7331.7
5334.5334.6334.6334.7334.7334.7334.8334.8334.9
10337.5337.6337.7337.7337.8337.9337.9338.0338.0
15340.5340.6340.7340.8340.9341.0341.1341.2341.2
20343.5343.6343.7343.9344.0344.1344.2344.4344.5
25346.4346.6346.8347.0347.1347.3347.5347.6347.8
30349.4349.6349.9350.1350.3350.5350.8351.0351.2

This table is taken from “Tables of Physical and Chemical Constants” by “Kaye & Laby”
It is published here with the kind permission of “Longman Group Limited” publishers.

첨부파일:

비밀번호: 삭제하려면 비밀번호를 입력하세요.

댓글 수정

비밀번호

/ byte